A Leader in Radiation Shielding Materials

205-833-5911

Custom Fabrication

Pitts Little Corporation provides custom fabrication for the following products. Please click on an item below to learn more.

Anodes

Click a photo for an enlarged view.

Back to Top

Cast Lead Counterweights

Pitts Little Corporation will custom pour lead counterweights, built to your specifications, when you need to increase mass in a confined space. These custom made lead counterweights are made in the U.S.A. and can be Nansulate or epoxy coated. Pitts Little Corporation will custom pour, per customer specifications, lead weights for internal and external ballasts to be used in applications such as: lead ballasts for specialty equipment, farm equipment, forklifts, cranes, elevators, bridges and marine ballasts. Pitts Little Corporation has fabricated lead weights for aerospace applications such as providing balance for satellites in orbit.

Click a photo for an enlarged view.

Back to Top

CUSTOM LEAD SHAPES

Pitts Little Corporation can custom cast and/or machine lead into any shape to meet your specifications. Pitts Little Corporation can custom fabricate cast lead plate to any size, custom machine lead plate to any size, fabricate custom rabbeted lead plate to any size and fabricate lead plate with custom alloys per customer specifications.

Click a photo for an enlarged view.

Back to Top

CUSTOM SHIELDED DOORS AND PARTITIONS WITH LEADED GLASS WINDOW

Click a photo for an enlarged view.

Back to Top

DOOR JAMB SHIELDING

Click a photo for an enlarged view.

Back to Top

E-BEAM

Click a photo for an enlarged view.

Back to Top

HOT CELLS

Click a photo for an enlarged view.

Back to Top

ISOTOPES RADIOLOGICAL LAB SHIELD BOX

Used in radiological lab to work with isotopes.

Click a photo for an enlarged view.

Back to Top

PORTABLE SHIELDED SCREENS

Click a photo for an enlarged view.

Back to Top

PRIMARY CEILING LEAD SHIELDING INSIDE VAULT

Click a photo for an enlarged view.

Back to Top

PULL BOX

These images represent a pull box shield in a high energy vault. This is a special situation shield. This type of shield is employed to attenuate neutrons if cables have to be pulled through the vault wall.

Click a photo for an enlarged view.

Back to Top

RADIATION TEST AND CALIBRATION ENCLOSURE

This custom radiation test and calibration enclosure was designed with the engineers and physicist from Lawrence Livermore National Laboratory. The shielding enclosure is designed to contain multiple radiation omitting and radiation detection instruments. The chamber is designed to attenuate gamma radiation from multiple sources. The radiation enclosure has multiple radiation shielded doors and radiation shielded ports. The radiation shielded enclosure was constructed with interlocking modules to allow the unit to be moved through the lab and reassembled on site.

Click a photo for an enlarged view.

Back to Top

RADIOACTIVE DECAY DRUMS

Pitts Little Corporation can fabricate Radioactive Decay Drums to meet your specifications. We can also design and build a shielded temporary storage area for your radioactive materials.

Click a photo for an enlarged view.

Back to Top

STAND ALONE HDR ROOM

Stand Alone Retrofit HDR (High Dose Radiation) Enclosures use substantial shielding for the walls, door and ceiling. Pitts Little Corporation HDR enclosures are site specific to meet your shielding and space needs. These custom designed rooms are built to your length, width and height requirements. Pitts Little also will supply and install the door, operator and hinges. The lead and/or high density block thicknesses will be determined by the physicist of record.

Click a photo for an enlarged view.

Back to Top

STEEL PLATE WALL SHIELDING

Click a photo for an enlarged view.

Back to Top